[347 tony]

Here's the dilemma, Running a shinko -1 on the front and stock rear the thing has run [email protected] on the rev limiter in 4th ,so i changed to -1 front, -1 rear and it went [email protected] 145 top of 4th no rev limiter ,are you guys shifting to 5th? Tks Oh thats stock wheelbase.

 

[347 tony]

I guess I'll try the 40 on the back again tomorrow, It's not helping my 60, but I didn't really give it enough time, I broke two clutch plates the other night, so didn't really have enough seat time with it, all my passes are usually with -1 and stock 41, I'd love to run my 43, but then she's to wheelie happy(maybe with longer chain) See the problem is, the air is starting to get better here and that means that with the stock 41 she's gonna hit the limiter sooner so I'm thinking this will not help. :dontknow:

 

[347 tony]

Well were gonna try, I'll keep ya posted. Tks :thumbsup:

 

[347 tony]

Why would you have a Shinko on a SWB bike? Its over 4lbs heavier than most tires.......

Didn't realize that, tk you.

 

[347 tony]

I'm assuming this gearing may work, I'm not hitting the limiter and ran a [email protected] with a 116.58 mid MPH, and a 1.789 60 ft, Only got 3 passes in, so I'm gonna take her up Tues night usually able to get 25 or 30 in, that will tell the tale. Just wanted to say though with the 41 on the back, she would go out every pass at 144 with a 115 mid, the only thing that put her in the 9s was if i ran a low 1.7 60/1.73 or 1.74 ,otherwise she was in the 10.0s with high 1.7s or low 1.8s. For our All Bike Weekend did 69 passes, 12 were 9.90s and 29 were 10.0s The rest were oops. Tks for any input.