Kawasaki ZX-10R Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
35 Posts
Discussion Starter #1
I BOUGHT SOME WOODCRAFT/CFM REARSETS AND THERE WAS NO MOUNTING POINT FOR MY BRAKE LIGHT ACTIVATOR ON THE RIGHT SIDE WHATS UP WITH THAT ARE THESE NOT STREET FRIENDLY,. MAYBE SETUP FOR TRACK ONLY:sad:
 

·
REPOST Enforcement Mod
Joined
·
14,876 Posts
Yeah, most aftermarket rearsets are geared for the track and don't provide a rear brake switch mount. You have to get a pressure switch that mounts to the rear master cylinder and splice into the wiring for the brake. They are about $25. Here's one:

http://www.motosport.com/street/pro...ke+switc&srchHistoryURL=zrl7u3ws||words~brake switc^parentCategoryID~category_root^categoryID~3^categoryName~Sport

I just zip-tied the switch out of the way and use the front brake to activate the brake light.
 
1 - 3 of 3 Posts
Top