How is it going guys. I just swapped the motor out of this 2012 ZX10R & put in a replacement engine from a 2013 ZX10R. When I turn the key to the on position the coolant temps tire reads 176 degrees when completely cold. The bike also won’t start. It clicks once and then starts priming the fuel...
I would like to configure the electronic suspension in manual mode, in the smoothest way possible for potholes.
The suspensions range from 0-15 in compression and rebound, the factory value is 10/10 front suspension and 6/6 rear shock.
I've tested 6 compression, 8 rebound front suspension and 4...
I've had my 07 ZX 10 for about 2 months now, bought from a dealer. Been having a few issues recently.
Went out for a ride, stopped at a traffic light, the dials went completely of, as I rode off the engine cut out.
First thing I did was change the battery. Bike started up on the first swing...
Hey guys. Just picked up a used 2012 ZX10R. Has about 15k miles on it with a graves slip on. Didn't see a power commander, but i haven't really done a thorough search of the bike. When I get on the throttle it doesn't go past 9500 RPM. I called a Kawi dealer today and they said it was a factory...
SS Motor built by Farrell Performance. It is pretty fast bike.
Woodcraft Engine Covers-left and right
Woodcraft GP Shift Rearsets
Lightech Chain adjuster with lifter for rear stand
Graves slip on
SS brake lines
ohlins race steering damper
Hey Everyone, this is my first time posting in here but I have already learned so much from everyone on this forum.
I am looking for a lock up clutch for a 2007 ZX-10r and cannot seem to find one without spending $2500 bucks for a hays.
Does anyone have any for sale or know anyone that would...
I have for sale two Brothers Racing Black Series Slip-On Exhaust - Kawasaki - ZX10R. It is pretty much like new. I changed to something else. Is coming from my 2014 zx10 and I used it maybe for 1500 miles. It comes with original box and all the hardware and clamp. You don't need to...
hello everyone i know this issue has been talked about but i need everyone with a cracked frame or who has had a cracked frame to follow these instructions, i have a crack in my frame as well. This issue started 2 years ago i drilled the cracks and took it very easy it has now spread. i called...
2012 Kawasaki ZX10-R, Green/Black, DynoJet Power Commander 5, DynoJet Auto-Tuner, DynoJet Quick Shifter, Arata Slip-On, MRA Screen, 176 HP on rear wheel. Tuned by DynoJet Technician was. Tuned for mid-range instead of top-end. It's a love affair!
I am busy preparing my track fairing for next year.
I have already done a mock-up using a wire diagram I found.
I am looking for a full scale template of the bike's fairings in order for me to put the design on it. I want to use this to cut out the pieces so that I can stick them on...
2012 Kawasaki Ninja ZX-10R
Stock, with Woodcraft frame sliders, spools
like new, never been down
original owner, bought Oct 2013 as leftover
located in Delaware
Pics here --> http://philadelphia.craigslist.org/mcy/4598031408.html
I have a Carbon fiber graves exhaust slip-on with titanium link pipe. I had the pipe on my 2012 zx10r for about a year. The bike was dropped and it dented the end cap on the slipon but that's all. I just bought an Austin Racing pipe and just want to sell the graves to get funds to buy a...
Ok everyone, I have a 2012 ZX-10 with about 6000 miles on it. Haven't had much of any problems with it, but after sitting in the garage through winter I started having downshifting problems.
I drove it some throughout winter but not a lot. I pulled it out and seems like it is hard to...
When I turn the bike on the low beam flickers and then turns completely off, same thing with the high beam. It started with low and then a few weeks after the high started doing the same thing. The YouTube link below is a video of what happens when I turn the bike on. Any help or suggestions...
I am selling for a friend a 2004 yzf 450 4 stroke dirt bike
Has a upgraded big brake setup
Street tires(Slicks) and rims from a 500cc sport bike
Longhorn forks/triple tree
Slip on pipe I believe fmf
** pictures will be up by midnight
This thing rips!
Little trouble on cold start but anything...
Prices do not include shipping and are OBO but will NOT accept lowball offers:
THIS IS ALL THATS LEFT
**Carbon fiber pieces-:badteeth:
carbon Heel gaurds $ 35
Flush mount tinted turns $35
Hyperpro stabilizer active version(no mounting kit) works on many bikes $100
Stock slip on $50 one...