Kawasaki ZX-10R Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-6 of 6 Results
  1. The ZX-10R
    hey all ! Just put my new EBC rotors on the bike. these are high carbon stainless steel lasercut and double disc ground for ultimate flatness ! these are comparable to Galfer wave rotors but cost half as much for the same technology and materials.:idea::thumbsup: I also got EBC double H pads...
  2. The ZX-10R
    Had 320mm galfers on my 04. Thought about swapping them to the new bike but was going to leave the braking system alone after I changed the pads. Fast forward to now and I swapped in a pair of 320mm braking SK rotors. Took the bike out to get the pads/rotors bedded in yesterday and went on a...
  3. The ZX-10R
    I don't know which i should get next, the galfer super bike rotors for the front, or if i should get the brembo rcs 19 master cylinder first. I know each have their benefits , just want some opinions on which i should change first.
  4. The ZX-10R
    Does anyone have a technical drawing of a gen 1 front and rear rotors. Im looking for one to design my own on a cad program
  5. The ZX-10R
    I notice that the pads have a constant rub on my rotors, my front wheel doesn't have any free spin with the calipers on, the rotors are not warped. With the calipers off, the wheel spins forever. Short of buying GP calipers with retraction devices, is there any way to get the pads not to...
1-6 of 6 Results
Top