Kawasaki ZX-10R Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-17 of 18 Results
  1. The ZX-10R
    I’ve looked at almost every thread on here for the topic of the 2016+ electronic steering damper, and the general consensus is to buy a new manual damper or do the conversion from ESD to manual damper with an adjustable dial in place of that motor. Before I shell out $450 for a manual ohlins, I...
  2. Suspension and Tire Tech
    I’ve been offered a Gen 4 Ohlins TTX (ka 0360) and I’m looking to see if anyone else has done put one on a gen 5? Any issues? Looking at the spec they look to be the same length with the only difference being the length adjustments. +4/-2 for the gen 5 and +6/0 on the gen 4. Any other difference...
  3. Suspension and Tire Tech
    Hey ZX10R community. Sounds like this question may have already been answered, and looking to confirm/clarify. It appears from what I've seen is that the linkage on the Gen 5 provides a more linear travel. And that the Gen 5 link plates will swap over to a Gen 4 with some add'l mods needed...
  4. The ZX-10R
    I picked up a used ohlins ttx shock for my gen 3. From reading here apparently there is a spacer that comes with them. I presume it goes in between the top mount and the frame. Would anyone know what size it is? Tks
  5. Parts, Gear and Accessories
    This shock is the Ohlins KA788 TTX type shock T36PR1C1L. There about 50 street miles, and one track lap on it . This fits Kawasaki ZX10R 2008, 2009 and 2010 This shock has a hydraulic preload adjuster, adjustable rebound damping, adjustable compression damping, adjustable length, and a piggy...
  6. Suspension and Tire Tech
    Hi, Yesterday I took my tank off to replace air filter on my 2014 zx10r. It's only got 2k miles on it (bought brand new late last summer) but I wanted to put a K&N in. I took my time with the job and was very careful no broken parts or extra screws or errors/lights when I was done. Today on...
  7. Suspension and Tire Tech
    Hey guys, I'm asking for suspension setup advice since I ran out if ideas. I was running a stock setup on track an it felt just fine, however I decided to upgrade my shock to Ohlins (KA345) since it should have been better. Before that I've changed stock 190\50 tire to 190\55 and it still felt...
  8. Parts, Gear and Accessories
    I have a rear ohlins rear shock for sale. This shock has a hairline fracture on the upper part of the body. I got estimate to fix it . Approx 100-200 dollars for a weld/ tourch job.. i didnt look into purchasing the acutal part itself. The. Price was depending on if I removed part from shock or...
  9. The ZX-10R
    I did some research before sending my Ohlins steering damper off to be rebuilt to aftermarket spec and I came across some threads that mentioned it might have the potential to break under maximum dampening. I just wanted anyone considering this to know. This can happen. I cranked it all the way...
  10. Parts, Gear and Accessories
    I have a Ohlins TTX 36 Rear Shock I need to sell. I ended up getting rid of the bike and don't need it anymore. Used for 2 race weekends this yr. and half a season last yr. Like new condition. $875 shipped to lower 48
  11. Parts, Gear and Accessories
    Ok, Here is what I have for sale. All prices include shipping to Continental US. Everything is used but in great condition. Ohlins TTX Rear shock $825 Sold TTX 36 Leo Vince Full Exhaust with Ti Can $500 Sold Bazzaz Traction Control, Quickshift, Fuel Injection, $575 Sold With Handlebar...
  12. General Motorcycle Discussions
    Kennesaw, Georgia – June 21, 2011 - Graves Motorsports is now offering light weight rear replacement springs for the Ohlons TTX lineup of rear shocks. These springs are designed for use with the Ohlins TTX 36 rear shock and replaces the standard Ohlins springs 21040 and 21041 series.** Available...
  13. General Motorcycle Discussions
    I know it's not a ZX but we support the site here and have been building parts for the ZX bikes for sometime and thought everyone would like to see some of the latest in our video series.. ENJOY! Graves Motorsports suspension technician Kyle Guglielmetti taking the standard Ohlins Yamaha R6...
  14. Performance and Tech
    This question refers primarily to 08-10 models. I have updated the rear with the Ohlins TTX. For the fork I am looking at either installing the 20mm piston kit FPK105, or installing a cartridge kit, 25 or 30mm. My riding level is amateur racing level, the setup is intended for track use...
  15. Parts, Gear and Accessories
    Barely used Scotts Steering Dampner $225. Mount for 03-04 Kawasaki ZX6R/RR $50.
  16. Parts, Gear and Accessories
    Brand new, never installed Ohlins Steering damper for a 2002 zx6r. I sold the bike and have no use for it. I paid $650 for it so my loss is your gain. Everything is included to fit on a 2002 ZX6R. Will probably fit other bikes with different brackets. $450 plus shipping.
  17. The ZX-10R
    I am trying to find a rebuild how to, which I am sure someone covered somewhere on this site, I am just having trouble finding it. I am sure it comes as no surprise to anyone that the oem version of unit on 2006-2008 10R does not have the same stiffness settings levels that the aftermarket...
1-17 of 18 Results
Top