Kawasaki ZX-10R Forum banner
clutch
1-14 of 15 Results
  1. Performance and Tech
    My bike is knocking when I accelerate so checked the chain and saw that it was quite loose so tightened it up but it's still doing it. If I rock it back and forth with it in gear and clutch lever in you can hear the knocking. Any ideas? TIA.
  2. The ZX-10R
    I am currently sitting at 14k miles on my 2016 Zx10r. I'm still in the process of learning how to clutch up wheelie. Does wheelieing with the brocks clutch mod destroy the clutch since it takes away the slip? Asking because my clutch is currently shot, just wondering if that has anything to do...
  3. How To...
    Hello everyone, my name is Kristofer and i received a basket case of a bike. I have a 2005 Ninja Zx10r. Previous owner said the clutch wasn’t grabbing and told me it was bc the clutch push rod he had installed is a nut hair too long. Fast forward 3 days i ordered a “genuine oem” pushrod from...
  4. The ZX-10R
    ill start by saying I change my chain and sprocket -1 front stock rear and 520, went for a long ride a few months back and I noticed my bike slipping when at full throttle. I adjusted me my clutch from the cable screw and it went away. Went to track yesterday and added 2 gallons of 100 gasoline...
  5. The ZX-10R
    My Gen 3 ZX10 has had this issue for the past month where the clutch will squeak and make a whistling noise when its pulled in/ disengaged. It seems to be more prominent when the bike is warmed up, but sometimes it happens when its cool. I havent noticed any difference in the performance of the...
  6. The ZX-10R
    I'm new to the forum and this issue may have been addressed previously. I bought a 2006 zx10r with 22k miles. I did some minor work to get it running again but my main issue is first gear. First gear on my bike feels like it's slipping and it doesn't matter how much throttle is applied. The...
  7. The ZX-10R
    Hey Everyone, this is my first time posting in here but I have already learned so much from everyone on this forum. I am looking for a lock up clutch for a 2007 ZX-10r and cannot seem to find one without spending $2500 bucks for a hays. Does anyone have any for sale or know anyone that would...
  8. General Motorcycle Discussions
    Hey guys....I need some help. I have a 1st generation ZX10r. I have had many many clutch problems. From slippage to busting the clutch release comp puller. (I have busted three of these since November) I have a Brocks Clutch Cushion installed with EBC clutch fibers. I installed the cushion to...
  9. The ZX-10R
    Ok everyone, I have a 2012 ZX-10 with about 6000 miles on it. Haven't had much of any problems with it, but after sitting in the garage through winter I started having downshifting problems. I drove it some throughout winter but not a lot. I pulled it out and seems like it is hard to...
  10. Performance and Tech
    Hey guys, First post on any forum... So, on my ride to drop off my girl at her work I noticed a squeak coming from the left side gearbox area of my 09 10R. It would only be audible when I would put pressure on my gear shifter to upshift, then when I blip the throttle (clutchless shift) and...
  11. Performance and Tech
    Now I know when a bike starts to slip its time to change the fibers and plates. But this bike was purchased christmas of 2011. With only 5000 miles on it 4th gear starts to slip when I fully open the throttle and around 8000rpm. It does not do it if I gradually pick up speed. It is time for an...
  12. The ZX-10R
    I was on the Freeway in about third or fourth gear(about 65mph) I was down shifting and all of a sudden an "pop" sound and some grinding, bike was still moving rolling. I made it over to the side of the road, clutched, and the RPM's went up quickly. I turned the bike off and it would not turn...
  13. Parts, Gear and Accessories
    Parting out my engine- crank went out and took the cases with it. Bike had just over 10,000 miles and ran great. Here is whats left, all prices are shipped within the 48. Complete Head- $150 With both cams, all internals, tappet cover, plug wires. One intake boot is a little mangled- would...
  14. Performance and Tech
    I have an 05 zx10r and recently this condition has been getting progressively worse. For example when I am trying to back up with the clutch pulled in and the gear in first it is impossible. The bike wants to pull forward. So what I did next was put it on stands and when it was lifted and the...
1-14 of 15 Results
Top