Kawasaki ZX-10R Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-11 of 11 Results
  1. Race and Stunt
    Hello everyone! New member... My question would be If you would be able to "adapt" all the brake lines and the ABS module of the same year bike, to a non ABS version My questions are, would I need to change the ECU? Or the dashboard? Mine is a 2013 Zx10r, and has all the sensors on the...
  2. Performance and Tech
    My traction and power controls Yellow light as well as the dashes on the temp blink (Flashing) cranks but WILL NOT START canit be ABS the steering damper I do not have a key that goes to the ignition I just have a little killswitch fro the battery to the main power wire I’ve always kept it the...
  3. Welcome Newbies!
    Hi Just installed a full brembo system with FLOATING rotors on my 2014 zx10r (3k km old) expecting a massive jump in braking performance Net result has been that the ABS kicks in too early and regularly even in street riding. Have had a couple of close calls and am now disconnecting the ABS...
  4. The ZX-10R
    I posted video on my You Tube Channel the day after Christmas, when I was able to pick up my new 2016 from the dealership. https://youtu.be/WJC0dDof6II
  5. The ZX-10R
    So by chance, on my birthday Dec 22nd, the dealer gets my bike delivered. The dealer was not expecting it until mid-to-late January. Well, I picked it up the day after Christmas!!!! It is the Metallic Matte Carbon Grey with ABS. I picked it up from Kennedy's Sports Cycle in Elyria, Ohio. Please...
  6. The ZX-10R
    I changed my tire and now my ABS isn't working. It activates under slow speed and then defaults and the light stays on. Any ideas???
  7. Performance and Tech
    I have Attack triples with "4" offset (26 degrees) and at full left it rubs the hardline to the brake junction under the lower triple. Has anyone replaced the ABS pump hardline, and with what? Thanks in advance, petere
  8. The ZX-10R
    i have a 2012 with ABS, and do mostly track days. When I brake hard (entering a turn), the bike wobbles badly as the ABS does its job and sometimes, the brakes just "go away", meaning I lose almost all stopping power. It's messing with my head (and my laptimes). So I'm going to disable the ABS...
  9. The ZX-10R
    Had 320mm galfers on my 04. Thought about swapping them to the new bike but was going to leave the braking system alone after I changed the pads. Fast forward to now and I swapped in a pair of 320mm braking SK rotors. Took the bike out to get the pads/rotors bedded in yesterday and went on a...
  10. Performance and Tech
    UPDATE 2014-02-10: The "easy" fix, doesn't work. See this post for details :( UPDATE 2013-10-22: looks like there's an easy solution. See this post for details. --- With the ABS model bike there's a brake line going from the rear master cylinder which is attached to the OEM rearset down to the...
  11. The ZX-10R
    Hello everyone. I just got some troubling news from my dealer when I requested a Race Kit ECU be ordered for the new love of my life. :zx_blk: This is what they said: :BangHead: Does anyone know if the Race Kit ECU will be updated, preferably firmware update that will enable (or allow for)...
1-11 of 11 Results