Kawasaki ZX-10R Forum banner

Reaction score

Profile posts Latest activity Discussions About

  • medicbaldwin ·
    This wouldn't let me send the whole conversation at once.
    The Mancup is coming up in just a few weeks. I'm really looking forward to getting down there and seeing what these bikes are all about.
    I'll be flying into ATL on wed the 20th then driving down to Valdosta where my hotel is.
    medicbaldwin ·
    Hey Jim,
    I haven't been on here in a while. My race season is done and the bike has just been sitting. I ended up 5th if points with the group I race with and I went to the NHRA Division 6 Finals. I didn't do worth a shit but I had a good time. I decided to leave the nitrous bottle at home for the D6 Finals as I was struggling with finding consistency with it. I haven't had a chance to get back to the dyno to see where my injectors are at when i'm spraying nitrous, which was another reason I finished out the season running NA. No matter how much fuel map changing I tried, I was not able to get enough fuel in the bike to get an AFR I felt safe with.

    I'm kicking around the idea of a cam swap or just optimizing what I already have. I know there's something about moving the Gen3 intake cam to the exhaust side and replacing the intake cam, but, i'm not certain on this. What do you recommend?
    michael4012 ·
    Jim, im looking at a G4 1157 build, iv done 2 G3 builds using JE pistons 4mm strokers & =3mm bore, there a single ring piston because the pin is raised 2mm. Do you know of any other manufactures making similar pistons?
    F 18 driver ·
    Hi GAZ

    I'm in a bit of a tight spot. I wonder if I can request some help and insight from you

    My secondary throttle body sensor was pulled out of the socket and I'd like to replace it without replacing the entire throttle body.

    I see on eBay that they sell the secondary throttle body sensors… Do you know or can you please explain to me how to adjust it after I purchased it.

    I have adjusted TBS sensors before my Hayabusa…but I don't know how to do it on the 2006 zx10R

    Please help I'm desperate.

    Thanks very much.

    F 18 driver ·
    hello and good morning gaz

    I hope you had a very nice relaxing weekend

    My forks are leaking so I have to change the seals…

    Do you have any recommendation as to where to buy the seals from and what oil to use?

    I'd like to save a few bucks if possible

    Thank you very much.

    Your friend,

    Capncalyx ·
    Glad you still are on the forum, the stuff you share is gold man. Too bad you had to make a new screen name. Happy Turkey Day from Indiana.
  • Loading…
  • Loading…
  • Loading…