Track Day Rider
Join Date: Nov 2005
Location: Northumberland UK
PC111USB, Ignition Module and Speedo Healer
Just finished installing all these items and I found a good place for all of them. You have to move your tool kit to the rear compartment to fit in the PS3 and the Ignition Module but apart from that they all fit very neatly. The only place I could find for the Speedo Healer was beside the battery as the cables were not long enough to put it with the other two. I have the remote button mounted inside the dash above the speedo so there is no need to have instant acces to the main module of the Healer, I have gone with -12.2% correction as mentioned elsewhere on this board as I have a 16T front Sprocket fitted. I will take some photos of where they are installed later tonight and post them (if I can figure out how to do it).
Sorry I didn't take any as the installation progressed but I did sort of follow instructions that had already been posted here but with my own variations.
Not enough room here to list everything.