Help HELP - Kawasaki ZX-10R.net
 
LinkBack Thread Tools Display Modes
post #1 of 3 Old 08-07-2007, 10:38 PM Thread Starter
 
Join Date: Apr 2007
Posts: 6
Posting Frequency
 
My Bike won't start can someone help.

So I have an 05, and I have been putting sruff on it since the day I got it. Well I went to go put a 40 shot of NOS on, and everything is installed. Then I went to put my TRE on the same day, and it went in fine. I got it all back together, started it up, let it warm up, and got on ready to ride. As soon as I sat on the bike it sputtered and died. So I thought it might be the TRE since the NOS is hooked up by itself other than running it through the HORN. So the next time I had time, I called IVAN about the TRE, and we went through some things, and I ended up taking it off thinking that might be the Problem. So it started up, and ran just fine. Well untill I took it off the stand to ride it. THen it died again. I scanned over the bike to see if anything wasn't hooked up and I didn't see anything. I have taken it apart four times now trying to figure it out. Its acting like its not getting fuel. Someone, anyone please help!!

Last edited by scottshack; 08-10-2007 at 02:13 PM.
scottshack is offline  
Sponsored Links
Advertisement
 
post #2 of 3 Old 08-08-2007, 03:21 PM
FAF
Rent this space
 
Join Date: Feb 2006
Location: Pennsylvania
Posts: 6,590
Posting Frequency
Images: 8
           
Are you using a dry shot of nitrous or have you tapped into the fuel line?

Did it die when you put the stand up ? Check the stand switch if it did.

Did you plug the air sensor back in after you reinstalled the airbox.

Did you plug the fuel pump connector back together on the side of the frame ?
FAF is offline  
post #3 of 3 Old 08-09-2007, 01:05 PM Thread Starter
 
Join Date: Apr 2007
Posts: 6
Posting Frequency
 
I'm using a dry system, and I know the air box sensor is plugged in, and so is the fuel pump. The fuel pump comes on and the secondarys open up like they are suppose to. I have checked everything, I checked everything I can think of including the kick stand switch now. The FI light keeps flashing, and I can't get any codes off the bike. I'm to stubborn to take it into a shop, it ran right before I ripped it apart.

Last edited by scottshack; 08-10-2007 at 02:15 PM.
scottshack is offline  
Sponsored Links
Advertisement
 
Reply

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the Kawasaki ZX-10R.net forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in











Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode



Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome