installed it myself, took about 40mins (and im a mechanical noob :)... though had the advantage of fitting their similar speedohealer unit so had to follow similar instructions.
there is one fiddly bit to do where you have to pull some leads out of a connector and put into theres, it's easy enough once you have the hang of it, but it's quite hard getting your fingers to the wires at times
piece of cake though, only thing I'd say is make sure you do it on a near empty tank, as when you prop a full tank up for a few mins it leaks from fuel filler after a while
the actual gear indicator just velros on the mount plate to the left of tacho, fits in great there and though not quite at 90 degree to you is real easy to read while riding...
roughly order I did it...
remove the two small side panels under seat
undo center steering damper bolt and swing out of the way
remove damper bracket so tank can lift
prop up tank with a long screwdriver or similar
remove left hand fairing insert so you can route wire
then fiddle around with some connectors and your done..
i routed the wire for the indicator behind the fairing / frame by the water res, and up under tank where connections are made.. can do it without removing fairing with abit of jiggling about :D
Last edited by Fluke; 04-02-2008 at 02:33 PM.