Gen 4: 2011-2015 searching Racetrack setup TTX36 - Kawasaki ZX-10R.net
Reply
 
LinkBack Thread Tools Display Modes
post #1 of 22 Old 10-03-2011, 09:27 AM Thread Starter
Street Rider
 
Join Date: Jun 2011
Location: Hungary and Sweden
Posts: 85
Posting Frequency
 
Garage
Send a message via Skype™ to halfswede
searching Racetrack setup TTX36

Hi
i just buyed an öhlins rear-shock TTX36 for my GEN4
Front is only the fork oil is changed to öhlins oil.

where do i find some god setup for only racetrack use? I am a strong short breaker, with strong acceleration out of the curve, but i am not extremely fast in the middle of the curve
I am 86 kg.
thanks for your advices
gabor
halfswede is offline  
Sponsored Links
Advertisement
 
post #2 of 22 Old 10-04-2011, 04:34 AM Thread Starter
Street Rider
 
Join Date: Jun 2011
Location: Hungary and Sweden
Posts: 85
Posting Frequency
 
Garage
Send a message via Skype™ to halfswede
Quote:
Originally Posted by halfswede View Post
Hi
i just buyed an öhlins rear-shock TTX36 for my GEN4
Front is only the fork oil is changed to öhlins oil.

where do i find some god setup for only racetrack use? I am a strong short breaker, with strong acceleration out of the curve, but i am not extremely fast in the middle of the curve
I am 86 kg.
thanks for your advices
gabor
nobody use ttx36 rearshock? or you just don't wan't to shere secret setup?
halfswede is offline  
post #3 of 22 Old 10-04-2011, 04:52 AM
WSB Rider
 
SBK X's Avatar
 
Join Date: Feb 2011
Location: Australia
Posts: 914
Posting Frequency
    
Quote:
Originally Posted by halfswede View Post
nobody use ttx36 rearshock? or you just don't wan't to shere secret setup?
I use one but set up is personnel, not a secret.

My setup will vary to yours.

You need a different spring weight depending on your weight.

I suggest you get your sag set up by a professional suspension shop and they will give you base settings to work with, then you can tweak to your liking from there.

Is it at least sprung for your weight?
SBK X is offline  
Sponsored Links
Advertisement
 
post #4 of 22 Old 10-04-2011, 05:00 AM Thread Starter
Street Rider
 
Join Date: Jun 2011
Location: Hungary and Sweden
Posts: 85
Posting Frequency
 
Garage
Send a message via Skype™ to halfswede
Quote:
Originally Posted by SBK X View Post
I use one but set up is personnel, not a secret.

My setup will vary to yours.

You need a different spring weight depending on your weight.

I suggest you get your sag set up by a professional suspension shop and they will give you base settings to work with, then you can tweak to your liking from there.

Is it at least sprung for your weight?
thanks for your reply
i got it with 110 kg
than i tested 100 kg
now i am back with 110 kg
halfswede is offline  
post #5 of 22 Old 10-04-2011, 05:45 AM
WSB Rider
 
SBK X's Avatar
 
Join Date: Feb 2011
Location: Australia
Posts: 914
Posting Frequency
    
Quote:
Originally Posted by halfswede View Post
thanks for your reply
i got it with 110 kg
than i tested 100 kg
now i am back with 110 kg
I'm 90kg and at my weight the recommended spring is 11.14kg.

I have a 11.7kg/115nm spring which is a little stiff probably but the next choice down was a 10.7kg/105nm which is definately too soft for me.

Stock our Kawasaki was sprung at a low as 9.7kg which is way to low for me and the bike was squating everytime I would get on the gas and tend to run wide.

My spring is a 2 1040-41/115 L3610

The important numbers are the 41 which is the Ohlins rating and the 115which is the nm rating.

110kg seems high as, what's the numbers on your spring?

Have you ridden on that spring yet?

Below is the spring weights worked out for your weight, see the info in bold.


Recommended Shock Spring Rate for 86kg rider for a 2011 ZX-10R is: 10.972 kg/mm (use closest available)

Stock Shock Spring Rate: 9.7 kg/mm (stock)

Available Springs are:

RT SK SPR 58.2x152 8.0kg-79N SRSP 5815080
RT SK SPR 58.2x152 8.5kg-83N SRSP 5815085
RT SK SPR 58.2x152 8.9kg-88N SRSP 5815089
RT SK SPR 58.2x152 9.4kg-92N SRSP 5815094
RT SK SPR 58.2x152 9.8kg-96N SRSP 5815098
RT SK SPR 58.2x152 10.7kg-105N SRSP 5815107
RT SK SPR 58.2x152 11.6kg-114N SRSP 5815116

RT SK SPR 58.2x152 12.5kg SRSP 5815125
RT SK SPR 58.2x152 14.3kg SRSP 5815143
RT SK SPR 58.2x152 15.2kg SRSP 5815152
RT SK SPR 58.2x152 17.0kg SRSP 5815170
RT SK SPR 58.2x152 19.6kg SRSP 5815196
RT SK SPR 58.2x152 21.4kg SRSP 5815214
RT SK SPR 58.2x152 23.2kg SRSP 5815232
RT SK SPR 58.2x152 25.0kg SRSP 5815250

Last edited by SBK X; 10-04-2011 at 05:59 AM.
SBK X is offline  
post #6 of 22 Old 10-19-2011, 06:04 PM
WSB Rider
 
Fred-R's Avatar
 
Join Date: Jan 2009
Location: Levis, Quebec, Canada
Posts: 669
Posting Frequency
 
Quote:
Originally Posted by SBK X View Post
I'm 90kg and at my weight the recommended spring is 11.14kg.

I have a 11.7kg/115nm spring which is a little stiff probably but the next choice down was a 10.7kg/105nm which is definately too soft for me.

Stock our Kawasaki was sprung at a low as 9.7kg which is way to low for me and the bike was squating everytime I would get on the gas and tend to run wide.

My spring is a 2 1040-41/115 L3610

The important numbers are the 41 which is the Ohlins rating and the 115which is the nm rating.

110kg seems high as, what's the numbers on your spring?

Have you ridden on that spring yet?

Below is the spring weights worked out for your weight, see the info in bold.


Recommended Shock Spring Rate for 86kg rider for a 2011 ZX-10R is: 10.972 kg/mm (use closest available)

Stock Shock Spring Rate: 9.7 kg/mm (stock)

Available Springs are:

RT SK SPR 58.2x152 8.0kg-79N SRSP 5815080
RT SK SPR 58.2x152 8.5kg-83N SRSP 5815085
RT SK SPR 58.2x152 8.9kg-88N SRSP 5815089
RT SK SPR 58.2x152 9.4kg-92N SRSP 5815094
RT SK SPR 58.2x152 9.8kg-96N SRSP 5815098
RT SK SPR 58.2x152 10.7kg-105N SRSP 5815107
RT SK SPR 58.2x152 11.6kg-114N SRSP 5815116

RT SK SPR 58.2x152 12.5kg SRSP 5815125
RT SK SPR 58.2x152 14.3kg SRSP 5815143
RT SK SPR 58.2x152 15.2kg SRSP 5815152
RT SK SPR 58.2x152 17.0kg SRSP 5815170
RT SK SPR 58.2x152 19.6kg SRSP 5815196
RT SK SPR 58.2x152 21.4kg SRSP 5815214
RT SK SPR 58.2x152 23.2kg SRSP 5815232
RT SK SPR 58.2x152 25.0kg SRSP 5815250
are those parts number ar good for an 3rd gen Ohlins shock or just for the 4th gen?

I'm looking for parts number for a 10.7 kg/mm
Fred-R is offline  
post #7 of 22 Old 10-19-2011, 07:00 PM
WSB Rider
 
SBK X's Avatar
 
Join Date: Feb 2011
Location: Australia
Posts: 914
Posting Frequency
    
Quote:
Originally Posted by Fred-R View Post
are those parts number ar good for an 3rd gen Ohlins shock or just for the 4th gen?

I'm looking for parts number for a 10.7 kg/mm


Double check that is what you need here below.

http://racetech.com/ChooseVehicle.aspx

Enter your brand, bike and year, then on the next page click on calculate spring rate (it's in big writing accross top of page) put in your weight without riding gear and your bikes wet weight, it will tell you what you need. It should at least give you a good place to start. You really only need the nm rating of the spring which will be the same rating Ohlins or otherwise once calculated.

The numbers at the start will differ as the ones I posted where RT (Racetech), the Ohlins rep you order from will only care about what bike and year and spring rate, they will know the length needed and can suss out the Ohlins code for the spring easy as. Any issues let me know.

Last edited by SBK X; 10-19-2011 at 07:07 PM.
SBK X is offline  
post #8 of 22 Old 10-08-2015, 05:38 PM
GP Rider
 
Crescent1101's Avatar
 
Join Date: Feb 2013
Location: Tampa Florida
Posts: 1,833
Posting Frequency
 
I am having trouble finding the correct spring rate for my Ohlins TTX. I have the ohlins ttx 21041-36/ 105 spring on right now. Does anybody know what weight these are good for? I am 192lbs without gear. I have the option to buy a .95 and 1.0kg from someone.

2009 R6 Racebike - Up for sale!!! Let me know if interested.

2013 ZX10R- SOLD

2008 ZX10R- SOLD
Crescent1101 is offline  
post #9 of 22 Old 10-08-2015, 06:33 PM
Track Day Rider
 
Mantis_Tech's Avatar
 
Join Date: Jul 2014
Location: Calgary
Posts: 228
Posting Frequency
 
105 is too soft, you would be happier with a 110 if you have an attack ..kyle... link, or a 120 if you don't plan on getting a link. I'm sure LDH can chime in here. My opinion is just that, an opinion, I am 202lb unsuited, I wasn't happy with the 130 , the 110 was adjustable to give me 28mm sag , but I like the way the 120 feels best, I do not have a link
Mantis_Tech is offline  
post #10 of 22 Old 10-08-2015, 07:13 PM
Track Day Rider
 
A Squids Life's Avatar
 
Join Date: Dec 2014
Location: Adelaide, Australia
Posts: 216
Posting Frequency
  
I am 88kg naked or about 95kg fully leathered/booted up. I run a 120nm/12kg spring on my gen 4 TTX. I find this to be very good. Sounds like you are in a similar weight range to me. With the 11kg spring and max preload my sag was 47mm. I use a stock link and have raised the rear by around 6mm on the shock. The bike feels stable and planted cornering and doesn't wallow accelerating hard out of corners, sounds like this is your style of riding also.

Last edited by A Squids Life; 10-08-2015 at 07:17 PM.
A Squids Life is offline  
Sponsored Links
Advertisement
 
Reply

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the Kawasaki ZX-10R.net forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in











Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode



Similar Threads
Thread Thread Starter Forum Replies Last Post
2008 Racetrack Setup Information Manual tasos Performance and Tech 15 02-16-2011 01:12 PM
New Racetrack in Colorado .. Felix el gato Track 9 07-16-2008 03:46 PM
New Racetrack in South Jersey Skip114 Track 6 01-15-2007 09:15 PM
pocono racetrack video Zxrider Pictures and Videos 4 05-14-2006 02:23 PM
Kawasaki's NEW racetrack extremelean The Out House 9 08-10-2005 10:24 PM

Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome