The long awaited Phoenix has arrived. Stay tuned for our full review ETA Monday
Physical Specs:-Seat Height=29 inches
-125cc 4 stroke air cooled
-Single overhead cam 2 valve Horizontal (honda replica)
-24mm carb -20mm slide diameter -24mm intake manifold -88 main jet
-12v battery system
-5 speed 1 down 4 up transmission
-Electric start/Kick start
-Dual front hydraulic discs, single rear hydraulic disc
-16 tubeless front and rear tires
-Front inverted telescopic forks
-Rear mono shock
For those of you who know your engines will recognize that this is a hopped up version of the old honda trailbike motor which has a good parts availability and tons of upgrades. As of now the best bang for the buck you can do to this motor is a cdi box, rejetting it, adding a diff plug, and if you want to go farther, a big bore kit. You must understand that this has nothing to do with top speed and also top speed is not a good indicator of performance as you can gear it to go 100 if you want however you will have no bottom end. With the cdi upgrade and some carb tuning we recomend you go up one tooth on the front sprocket which will keep your acceleration the same but give you more top end. For those that want to get tons of performance out of this get the 140 big bore kit, cause not only are you upping the displacement but you are increasing the compression ratio and will gain about 30% more horsepower and can probably go up 2 teeth on the front sprocket and get this thing going around 75mph.
On monday we will continue the review and give more specs on this as of now this is the nicest, highest quality sport bike we have seen come out of china, so get yours while you can we will not have anymore till the spring time.
IF you do have questions on this bike or any other bike please post it in the sportbikes-general section
If for some reason you cannot see them they are in this directory http://badazztoyz.com/products/streetbikes/phoenix125/