Yes with a little bit of work.... I know for a fact that all Gens of the 10R will fit a 12R and a 14 will also fit a 12R so that means your 10R will swap right over to that 14.. You may need to monkey with the pivot although I think the 10 and 14 are the same size pivit shaft. The rear wheel and brake spacing could be some work I'm unsure. I know on my 12R with a Gen2 10R swingarm I use a complete 10R rear wheel and brake set up and it lines up perfectly with OEM spacers I've checked it several ways and it's dead in the middle.. I hope this helps you out..