Kawasaki ZX-10R.net - View Single Post - Gen 2: 2006-2007 noob reinstalling engine, unsure on a couple of plugs
View Single Post
post #2 of Old 10-05-2018, 09:31 AM
SpazOnaZX
GP Star
 
SpazOnaZX's Avatar
 
Join Date: Jul 2006
Location: S.V. Arizona
Posts: 2,779
Posting Frequency
        
The sensor on the front of the head/valve cover is the cam position sensor. The wires should run across the valve cover (to the left) and plug into the appropriate plug on the ignition side of the harness.

The other does indeed look like a ground ; it uses the same bolt as the other grounds shown in your picture. You should be able to visually trace it back to the - battery post, or use a voltmeter to do a continuity test to verify.

Attack life... it's going to kill you anyway.

Last edited by SpazOnaZX; 10-05-2018 at 10:08 AM.
SpazOnaZX is offline  
 
 
For the best viewing experience please update your browser to Google Chrome