Installed some rear LED's and a plate bracket I made...

[madryan]

So I bought a set of the LED modules from Greggs Customs. They're clear with Amber LED's. I decided to mount them in the tail section and wire them up so I could use the plate bracket I made the other day. Here's the pix...

I started by plotting the best spot to drill two .750" holes...




I then put the LED's in using a piece of really stiff foam wedged between the LED's and the tail light to hold them in. It's really secure and won't vibrate loose.




It's a Union job so my Dog Buster is supervising...



Here's what it looks like all put back together. Notice the temporary plate due to the lame DMV in Oregon taking forever.




Here's the bracket I knocked together with some scrap Aluminum I had laying around...



If anyone is curious about anything let me know. Total out of pocket was about $35.

[Lucky10R]

Great Post.
You might wanna add where to get the leds / part numbers.
It'll be helpful for others.

[UltimateAutosports]

Looks awesome!! Its really clean! I would totally do that to my 10, if it was an 08..... Hey I can't help but see your gun clip, you packen a AR15? I had one for awhile.

[madryan]

Originally Posted by Lucky10R

Great Post.
You might wanna add where to get the leds / part numbers.
It'll be helpful for others.

They're on Gregg's Customs website for $29.99. Cost $5 to ship and got them in two days. I see if I can dig up a link...

http://www.gcshopping.com/catalog/product_info.php?cPath=28&products_id=128&osCsid=7 10a7d2d09c6bea614c463380443b644

[madryan]

Originally Posted by UltimateAutosports

Looks awesome!! Its really clean! I would totally do that to my 10, if it was an 08..... Hey I can't help but see your gun clip, you packen a AR15? I had one for awhile.

Busted! Yeah... I've got an LMT I used to use for 3-gun before I got back in a Blues/Soul band and had to practice on IDPA night.

[jleachma]

Nice, thanks for the link. Are they easily visible? I know that LED's direct light, and if the sweep angle on them isnt enough they can be tough to see... thats what happened to mine.
I saw they come with the current limitors so they dont blink fast, can you confirm?

[Big Daddy]

Very clean setup & install.

BD

[55delray]

any vid of these in action ??

[Alien10]

Nice install, but I beat ya to it a couple months ago. I have them up front too.

[zxdave]

looks good guys..... def a great job on the installs