|
|
|
05-08-2012, 11:02 AM
|
#1
|
|
Street Rider
Join Date: Mar 2006
Posts: 53
|
Installation of Smog Block Off Plates - WHO HAS DONE IT??
I searched the site to see who has installed these on a Gen 4 2011/2012 model zx10r and could not find the write up anywhere if anyone has done it already. It is very tight in under the air box and they have a plastic rubber covering everything under there.
Who has done this and what do u do with the sensor which goes into the unit which is being removed? Will it through a FI light if u leave it alone? I know on the 07/08 ZX6R someone took a staple and made a connection from the two pins to stop the FI light.
Let me know if anyone has done this and what your results have been.
Thank you 
|
|
|
|
Sponsored Links
|
Advertisement
|
|
|
05-08-2012, 11:11 AM
|
#2
|
|
Champion Rider
Join Date: Aug 2007
Location: Portland
Bike: Green 05, Red/Black 2012
Posts: 410
|
Leave the valve in the harness, or you will get an FI light. (Or have your ECU flashed to ignore it)
You "could" just rip out the plastic shield.......
I just plumbed them together with a piece of hose.
No results....only clears up the a/f for dyno tuning.
__________________
02 998 Mono - Garage Queen
08 1098S Race - RIP
04 ZX10R Orange - SOLD
04 ZX10R Black - SOLD
05 ZX10R Green- Race- Blowed Up!
04 ZX10R Black- SOLD
05 ZX10R Green- Blowed Up!
05 ZX10R Green - FOR SALE!
2012 ZX10R Red/Black- Street
04 Z71 Avalanche
78 Corvette Indy Pace Car
63 340/327 Corvette Roadster
OMRRA #69
|
|
|
|
|
05-08-2012, 01:00 PM
|
#3
|
|
GP Rider
Join Date: Oct 2011
Location: Heart of Dixie
Bike: 2011 Green 10
Posts: 1,207
|
Quote:
Originally Posted by GreenWeenie
Leave the valve in the harness, or you will get an FI light. (Or have your ECU flashed to ignore it)
I just plumbed them together with a piece of hose.
|
Same here.
|
|
|
|
|
05-08-2012, 01:32 PM
|
#4
|
|
WSB Rider
Join Date: Mar 2012
Location: Seattle
Bike: rattle can gen 1
Posts: 997
|
i just capped them off and left the thing plugged in. same effect basically
|
|
|
|
|
05-08-2012, 01:38 PM
|
#5
|
|
WSB Rider
Join Date: Nov 2009
Location: Knoxville, TN
Bike: 2011 Green ZX 10R ABS
Posts: 525
|
Ivan's block off kit includes a mod to defeat the Fi light. Take the entire KLEEN air actuator out. Every gram helps!
Sent from my Motorcycle iPhone app
|
|
|
|
|
05-08-2012, 03:28 PM
|
#6
|
|
WSB Rider
Join Date: Dec 2011
Location: Heidelberg, Germany
Bike: Ebony Black ZX-10R
Posts: 532
|
A very good how to write up is here: about half way down the page.
http://www.untamedvelocity.com/2011%...ke%20build.htm
__________________
Guhl flash, Bazzaz QS4, Graves exhaust, BMC, KFG Re-valved Shock, mvxz 520 w/Driven +0/+2 sprockets, GB Racing covers, Evotech FE & sliders, shorty levers, rear cowl, COX rad guard, and go fast stickers :D |
|
|
|
|
05-08-2012, 05:43 PM
|
#7
|
|
Squid
Join Date: Mar 2012
Posts: 20
|
I was looking for this, thx
|
|
|
|
|
05-08-2012, 07:12 PM
|
#8
|
|
Street Rider
Join Date: Mar 2006
Posts: 53
|
Thx guys this helps out tremendous. Appreciate the feedback.
|
|
|
|
|
05-08-2012, 11:07 PM
|
#9
|
|
WSB Rider
Join Date: Mar 2012
Location: Seattle
Bike: rattle can gen 1
Posts: 997
|
pull the tank, pull the airbox, pull the plastic cover off teh front, the system is up front, 3 hoses, two screws on top of each place, piece of cake
|
|
|
|
|
05-13-2012, 04:54 PM
|
#10
|
|
Street Rider
Join Date: Apr 2012
Location: NJ
Bike: 2012 ZX10R 2005 R1 2001 zx12R
Posts: 76
|
Quote:
Originally Posted by nakedinseattle
pull the tank, pull the airbox, pull the plastic cover off teh front, the system is up front, 3 hoses, two screws on top of each place, piece of cake
|
Do you have pic. of it.
__________________
Tony 
CCS #69 |
|
|
|
| Sponsored Links |
Advertisement
|
|
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
|
|
|
| Thread Tools |
|
|
| Display Modes |
 Linear Mode
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT -5. The time now is 07:49 AM.
|
