Originally Posted by Maxi - Australia
The swingarm on this 16 has a hole in it but I will try and source one from a wrecker. The linkage and shock should be salvageable so I will bring those across.
The front end I am unsure of the condition as I haven't picked the bike up yet (still waiting on my mates insurance). Last time i saw this bike was at the site of the crash a few weeks back and I recall both rims being buckled so I suspect the forks are toast aswell.
It was a very nasty highside and the bike tumbled for a solid distance.
Gen4 rear rim will bolt up to Gen5 swing arm perfectly. However, fronts wheels are not a direct swap. Gen5 has 330mm rotors and Gen4 is smaller. If you move Gen4 forks over, then the wheel will bolt up no problem. Otherwise, with Gen5 forks you will need to get some spacers and different rotors to make Gen4 wheel fit. There are a couple of threads on this on this forum and some guys are selling the spacers too. Check it out.