11-29-2008, 11:18 AM
So on my 10r the front brakes were starting to squeal so i was takeing them off when one of the bolts that holds the caliper on started to strip a little on the head so i need to know what is the best way to remove it with out damaging the bolt any more then what it is. thank you in advance for all your help.
11-29-2008, 11:45 AM
Try adding Liquid Wrench you can get it from Lowes or Ace Hardware.
11-29-2008, 11:50 AM
Using a 6-point socket helps as well
11-29-2008, 10:11 PM
If you are referring to the allen head bolts I would get a new one once you get it out. Once they start to round off inside I have not had much luck continuing to use them.