Kawasaki ZX-10R.net - View Single Post - Gen 5: 2016 -> Question on identifying some torque specs
View Single Post
post #2 of Old 06-11-2018, 05:32 PM
REPOST Enforcement Mod
SkyDork's Avatar
Join Date: Feb 2006
Location: Wesley Chapel, FL
Posts: 13,338
Posting Frequency
Red Loctite is permanent. Blue Loctite is the temporary type.

Also, you're misreading the torque specs. Those specs would only apply to the OEM fender. Since you've replaced that with aftermarket, those specs don't apply. They can be used as a guide though. And if you'll notice, the specs are in inch-pounds. That's pretty damn light, they aren't crucial parts, so snug them up and you're done. Don't waste your time putting a torque wrench on those. Hand snug, not hand tight. Don't crank them until they won't turn any more, just a snug fit. You'll be fine.

I may not be perfect, but at least I don't ride a Suzuki.

Ridding the Internet of bad grammar, 1 post at a time.

SkyDork is offline  
For the best viewing experience please update your browser to Google Chrome