Kawasaki ZX-10R.net - View Single Post - Gen 5: 2016 -> Question on identifying some torque specs
View Single Post
post #1 of Old 06-11-2018, 01:48 PM Thread Starter
ng_Friend
Squid
 
Join Date: May 2018
Posts: 5
Posting Frequency
 
Question on identifying some torque specs

I just put a fender eliminator kit on my 2016 a few days ago, and I still need to tighten everything down to spec. I do have a copy of the service manual, but I want to make sure I'm looking at the correct part's torque spec. Are the "Flap Mounting Bolts" the correct spec for the fender? Also, when routing the turn signal + tag light wires, I had to remove this metal tray that was mounted directly under the passenger seat. Is this part secured by what they are calling the "ECU Cover Bolts" in the service manual?

Final question, it looks like some of these bolts were originally installed with either red or blue loctite. The service manual says to use non-permanent threadlocker, but should I used red where it looks like they used red from the factory, or would blue on everything be ok?
ng_Friend is offline  
 
 
For the best viewing experience please update your browser to Google Chrome