Track Day Rider
Join Date: Oct 2015
Location: Pattaya, Thailand
moto316's 2016 ZX-10R racebike build
This might be common knowledge but I was floored to find out that you need to remove the swingarm to get to a bolt that holds one of the ABS line junctions going to the rear brake line. Kawi must of been having a laugh when they designed this system. While I had it off I cleaned and greased the swingarm pivot and linkage bearings. ]
I thought I would need to do the same but with rear wheel, shock and exhaust off you can drop the swingarm far enough that I got the bolt loose with a small set of vise grips.. then just wiggled it off with my fingers!!!
Sent from Motorcycle.com Free App
Last edited by Newf; 06-14-2017 at 04:59 AM.