Kawasaki ZX-10R.net - View Single Post - Gen 5: 2016 -> CEL came on after integrated tail light install
View Single Post
post #1 of Old 03-20-2017, 10:16 PM Thread Starter
cruzimusmaximus's Avatar
Join Date: Mar 2017
Location: Sunny San Diego
Posts: 34
Posting Frequency
CEL came on after integrated tail light install

Good Evening all,

So today my fender eliminator kit and integrated tail light came in, install was super easy, nailed it on the wiring first go'round. Everything flashes the right way etc......

However, after i had everything together i cranked it up and noticed the check engine light was on.......It got dark by the time i had everything put together so i didnt get a chance to triple check my work but im almost 100% positive that i got everything back together right. Any ideas on what could of caused it? See below for the specific light i got. This is the first Kawi i owned my R6's i never ran into this issue

Bike: 2016 KRT Non-ABS


Thanks in advance guys!



PS: after everything was done it looked AWESOME, will post pics tomorrow after work when its light out!
cruzimusmaximus is offline  
For the best viewing experience please update your browser to Google Chrome