Kawasaki ZX-10R.net - View Single Post - Gen 5: 2016 -> OEM Quick Shifter is Terrible!
Thread: Gen 5: 2016 -> OEM Quick Shifter is Terrible!
View Single Post
post #9 of Old 03-20-2017, 03:37 PM
GP Star
Join Date: Jun 2011
Location: Limbo
Posts: 2,788
Posting Frequency
Originally Posted by rider3life View Post
I wonder if superbikeunlimited use woolich to flash their ECU's. Regardless the 10R gives the best gains from the flash for sure.
Nope they don't. So expect a $400 upcharge in addition to their cost of flashing your ECU for just enabling it in the ECU through them and the software they use.

You can get the kit to do it yourself through me, use my guidance and get a discount on the hardware itself. That way you can actually play with the kill times and the blip settings to find out what works for you.


You can send it away to someone to have it flashed. If you're 100% set on sending it away, look at 2 Wheel Dynoworks or Schnitz Racing to name a few.

If you still have problems in the upper gears/upper RPMs with the sensor detecting shifts, then you may want to look at upgrading the sensor. The OEM one is a piece of trash. After upgrading to the Woolich sensor I haven't had any of the problems I previously had which were
1) Upshifts not being detected in higher RPMs
2) Upshifts not being detected in higher gears
3) Downshifts not being detected in faster downshifts putting me in a gear higher than I wanted.
ZX10RArcher is offline  
For the best viewing experience please update your browser to Google Chrome